| Practice Number | Practice | Points Available with this Product | Additional Conditions of Use to Earn Points | Manufacturer's Comments |
| 606.1 | Biobased products are used. 8 points maximum awarded. | 6 | To earn 6 points this product must be at least 1% of the construction material cost AND another bio-based product, also at 1% of material cost, must be used. Lesser points are available at the 0.5% level. | AdvanTech® panels are structural composites comprised of wood strands bonded together under heat and pressure. Wood is a renewable forestry product. |
| 606.2(2) | A minimum of 2 wood or wood-based products used for major elements are certified to the requirements of a recognized product program. | 4 | To earn 4 points a second certified wood product must also be used as a major element for 4 points. Lesser points available for use with a minor element. | The Sustainable Forestry Initiative (SFI) has been implemented throughout all Huber Engineered Woods (HEW) procurement practices. |
| 606.2(1) | A minimum of 2 wood or wood-based products used for minor elements are certified to the requirements of a recognized product program. | 3 | To earn 3 points a second certified wood product must also be used as a minor element for 3 points. | The Sustainable Forestry Initiative (SFI) has been implemented throughout all Huber Engineered Woods (HEW) procurement practices. |
| 607.1 | Products containing fewer materials are used to achieve the same end-use requirements as conventional products. | 3 | At least 80% of sheathing in the building is this product. | AdvanTech® panels are engineered to support greater design loads than commodity floor panels. Fewer primary support members could potentially be used in combination with AdvanTech panels. |
| 606.3 | Materials used for major components are manufactured using a min. of 33% of the primary manufacturing process energy from renewable sources, combustible waste sources, or renewable energy credits (RECs). | 2 | Product must be used as a major component of the building. | More than 60% percent of the net energy used to manufacture HEW products is recovered from byproducts of the manufacturing process. |
| 901.4(1) | Structural use plywood per PS 1 or PS 2. OSB per PS 2. All marked Exposure 1 or Exterior. Mandatory for certification. | Mandatory | A minimum of 85% of OSB in the building is this product. | AdvanTech® panels exceed the requirements of PS-2 and are manufactured using and advanced exterior type resin system. Urea formaldehyde resins are not added to AdvanTech panels. |
| 901.4(2-6) | A minimum of 85% of material within a product group (i.e., wood structural panels, countertops, composite trim/doors, custom woodwork, and/or component closet shelving) is manufactured in accordance with the following. 10 points maximum awarded. | 4 | A minimum of 85% of OSB in the building is this product. | Urea formaldehyde resins are not added to any products manufactured by Huber Engineered Woods. |